We can offer over 2.000 types of carbon steel in plates, heads or machined parts as per customer’s drawing. The carbon steel plates can be supplied in the following dimensions:
Thickness: from 6 to 500 mm
Width: from 1.000 to 5.200 mm
Length : up to 36.000 mm
The carbon steel is used for naval industries, offshore, waste resistance, patterns and tubes for plastic injection. They are produced in accordance with ASTM, DIN, BS, SS, NF standards and certified by the ABS (American Bureau of Shipping), BV (Bureau Veritas), DNV (Det Norske Veritas), GL (Germanischer Lloyd), LRS (Lloyds Register of Shipping), RINA (Registro Italiano Navale) and RS (Russian Maritime Register of Shipping).
Flat rolled carbon grades
Hot rolled, pickled and oiled (HRC PO) – (1,3 to 25,4 mm) Width up to 2010 mm
Cold rolled (CR) – (0,3 to 3,5 mm) – Width up to 2010 mm
Coated Steel
Electro galvanized (0,35 to 3,5 mm) – Width up to 2000 mm
Galvanized (0,35 to 3,5 mm) – Width up to 2000 mm
Galvalume (AZ) (0,35 to 3,5 mm) – Width up to 2000 mm
Aluminized (FAL, AL) (0,35 to 3,5 mm) – Width up to 2000 mm
Galfan (ZA) (0,35 to 3,5 mm) – Width up to 2000 mm
Galvannealed (GA) (0,35 to 3,5 mm) – Width up to 2000 mm
Zink-Magnesium (ZMg) (0,35 to 3,5 mm) – Width up to 2000 mm
Quality: Commercial grades (CS-DS), Drawing grades (up to EDDS, IF), high strength (HSLA, all the way), multiphase (DP/CP/Trip etc.), API PSL I/II up to 1 inch.